Photo via: reusegrowenjoy.com
You may also be interested in 🙂
View All Pages Prev1 of 8Next If you are planning a bathroom makeover using black and white floor tile, this list will give you some inspiration and provides the sources for the tiles. Of all of the new elements that I put in my master bathroom makeover, there are 2 things that I have had all kinds of questions and comments about. The first is the zebra stencil on the walls (I will be doing a post on how to do that). The second is the black and white floor tile. While I loved the floor tiles the second I saw them, I didn’t realize everyone else would love them as much as I do! Although I probably shouldn’t be surprised since black and white is a very classic color combination that goes with pretty much every style. When I was going through the process of picking the tiles, I actually saw quite a few different patterns that I liked before I settled on the one I chose. With all of the interest, I thought I would share some of those other inspiration pictures (and tile options) that I looked at. Keep reading to see the stunning ways that black and white floor tile was used in these beautiful bathrooms. Prev1 of 8Next Have comments or questions on these bathrooms with black and white floor tile? Tell us in the section below. View All Pages You Might Also Like
Made from a beautiful antique/vintage hand-woven hemp grain sack from Europe, the textile dates from the early 1900s. It would be a great holiday accent pillow or simply fit well into your farmhouse or rustic decor. MATERIAL AND COLOR: Heavy hemp fabric, heringbone pattern handwoven. Black stripes. The fabrics tone is a straw colour, rustic texture. CONDITION: Vintage good condition, no hole or tear, never repaired. Due to the vintage nature of these linens, there are some very minor imperfections, spots from age and faded discoloration in the fabric. These are considered part of their charm. Zipper closure. Please note that my pillow shams are made of grain sack on both sides as opposed to the front only. The fabric on the back has no stripes. Size: max. 37.5 x 17 (95cm x 42cm) in the pictures 1-4. The rest of the dimensions will fit the usual inserts as seen in picture 5. NOTE: If you need a different size, please contact me with your request. Insert not included. ***If you want us to make a custom pillow insert, please purchase from here: https://www.etsy.com/listing/217553360/add-a-custom-insert-to-your-throw-pillow ***If you want to add the small pillow cover from images, please purchase from here: https://www.etsy.com/listing/268848178/authentic-grain-sack-pillow-cover?ref=shop_home_active_1 More pillow covers from antique authentic grain sack fabric: https://www.etsy.com/shop/Medreana?section_id=14363513&ref=shopsection_leftnav_6 HISTORY OF THE EUROPEAN GRAIN SACKS: These grain sacks were originally produced about 100 years ago on European farms, to bring grain to the mill. Each sack was hand woven from hemp with a distinctive pattern of strips showing which farm it belonged to, sometimes with a hand stitched monogram. The reason for the unique family farm markings were because the farmers wanted to be able to identify their own sacks when transporting sugar, flour and grain to the market. And when the grain came back from the mill, the unique markings ensured the sacks were returned to their rightful owner. These textiles are, by nature, extremely Eco-friendly! The average age of these textiles is 100 years and they were naturally home grown, home retted (in local lakes and ponds) and woven by hand. These textiles are being re-cycled today and showing off the extreme craftsmanship of past generations! Yet another feature that makes these textiles extremely eco-friendly is their durability. These textiles were designed to endure generations of constant use and will have an extremely long life. The timeless beauty of this linen and their extraordinary quality make these textiles the perfect choice for any home and an environmentally friendly choice. Grain sack adds a bit of history and authentic vintage charm to whatever it touches! These textiles are machine washable, tumble dry! For more great ideas you can visit me on Pinterest by using the link below: http://pinterest.com/medreana/grain-sacks-home-decor/ __________________________________________________________ If you require any further information feel free to contact us. Worldwide shipping options available . Dont see your county listed ? Ask for a quote! _________________________________________________________________ Thanks so much for stopping by our store and we hope to see you again soon
If you love the Scalamandre zebras but would like a less expensive option, try out this easy DIY zebra wallpaper tutorial that can be done in a day. As some of you may remember…when I was making over my master bathroom, I had a dilemma. The Scalamandre Zebra Wallpaper I fell in love with the Scalamandre zebra wallpaper but couldn’t justify the price for my builder-grade room. (If you also really love it, and want to splurge, you can find it at decoratorsbest.com). I contemplated doing something else…or just leaving the walls just as they were (painted gray). But I really loved that zebra pattern! So in the end, I did what I usually do when my vision for the room doesn’t match my budget…figured out a way to make it a DIY project. And judging by the number of questions I got about it, I’m not the only one who might be doing this, so I thought I would share how to make my DIY version of the Scalamandre zebra wallpaper. The Hunt For A Stencil For me, trying to make something look like wallpaper when it’s not means stenciling. (I’m not a particularly good artist, so hand-painting zebras was definitely out of the question!) The great thing about doing it yourself is that you get to customize it however you want. And I didn’t really like the arrows in the original wallpaper. It seemed like they were shooting at the zebras which didn’t really give me the relaxing zen feeling that I wanted for the bathroom. That meant all I needed was a zebra stencil…how hard could that be? So off I went to try to find a zebra stencil. One that was big enough to make a statement, had enough character to be interesting and could be delivered to my house in 2 days. (The bathroom makeover was part of the One Room Challenge so everything was a bit of a rush.) There were all kinds of zebra striped stencils like this one* but they weren’t actually of zebras. Large Zebra Stencil* Finally, I found this one. I really liked the zebra’s attitude, but it was actually a little too big and it ships from Korea…meeting my 2-day delivery deadline just wasn’t going to happen. Small Zebra Stencil* And this one, which was a little too small and didn’t have enough movement. Zebra Stickers* I even considered these peel-and-stick zebra wall decals*, but I didn’t think I really wanted stickers on the walls in my bathroom. And I thought I was going to have to give up on my stenciling idea. Until I ran across a zebra image on Adobe Stock and decided I could use it to make my own stencil. What You Need Materials Stencil Mylar* – I used 12″ x 17″ sheets so that my zebras were a decent size Silver paint* White paint – I used a latex paint sample can from Sherwin Williams Black paint Tools Die Cutting Machine* Foam Rollers* Foam brush* Step 1: Make The Stencil I made the stencil using my Klik-N-Kut die cutter machine* (but you could use any die cutting machine that will allow you to import .jpg images) and some stencil plastic sheets*. While it is technically possible to create the stencils manually with a utility knife, I think trying to cut out all of the zebra stripes by hand would be very tedious! Looking at the Scalamandre zebras, they have a white background with black stripes. So that meant actually creating 2 stencils…one for the white background and one for the stripes. To do that, I edited the original picture using Photoshop and made 2 new ones. Then I imported the images into the software that comes with the die cutting machine and set it to work! (Read the instructions for your machine if you’re not sure what settings to use for stencil plastic). Step 2: Take It For A Test Run The tricky part about using 2-part stencils is making sure you know how they are supposed to line up. To test it before I actually started messing up the walls, I used a piece of construction paper and some colored pencils. The first step is to color in the background stencil with white. Then take the stripes stencil and position it in the right place. The easiest way to do this is to line up a couple of the easy to identify end points…like the end of the tail, the nose and the end of the zebra’s legs. Use the black color pencil to draw in the stripes. It doesn’t have to be perfect…just enough so that you’re comfortable that you know how they fit together. Tip: If you are using this stencil, the black lines on the zebra’s mane aren’t over the white part, so don’t use the back of the mane to try to line up the stencil (learned from experience). Step 3: Paint The Background I love this silver paint* that I used for the background. It has just enough shine (but not too much) and goes on really easily. For the best results, use a foam roller to roll the silver paint onto the wall. Be careful not to press too hard or you will leave roller marks in the paint. I only had to do one coat, but I was painting over gray (so there wasn’t much difference in the color tone). Step 4: Decide On Your Pattern Figure out where you want the zebras to go. I did mine in a zig-zag pattern going down the wall and had each row facing in the opposite direction. You could also line them up on top of each other or have them facing all the same way. That is the beauty of stencils…you can do whatever pattern you want with them! Step 5: Apply The Background Stencil Start in a corner that is not too obvious. Behind the door is a good spot 🙂 It may take a couple of tries to get the paint on exactly right and this way it won’t be in a noticeable spot. Put up the background stencil. I found that the stencil clung pretty well to the wall without requiring any extra help, but if yours doesn’t you can tape it at the top to hold it in place. Then use the foam roller to cover the entire stencil area with white paint. This part is really easy! Lift off the stencil and move it over to where the next zebra should go. Remember to leave space for the parts of the zebra (like the tail, nose, and feet) that will be a little longer once the black goes on. If you are having the zebras face in different directions like I did, do all of the ones that are facing in the same direction first. Then go back and fill in the ones that are facing in the other direction. You will need to turn the stencil over to do this, and chances are the paint around the edges won’t be completely dry, so you will either need to wait until it is or dry it off thoroughly with some paper towel. When you have finished all of the white backgrounds, it is time to move on to the fun part…the stripes! Step 6: Paint The Stripes Check to make sure that the white paint has dried on the wall. Then position the striped stencil over the white paint, lining it up as you did in the practice run. Don’t worry if you don’t get it lined up perfectly every time (I certainly didn’t!) When they are all done, you won’t really notice it. Dip the foam brush into the black paint and wipe off all of the excess. You don’t want too much paint on the brush or it will look too dark against the white and may run under the stencil. Dab the brush onto the stencil until you have covered all of the striped area with paint. Same as you did with the white paint, it works best to do all of the zebras that are facing in the same direction before moving on to the opposite facing ones. Before you know it, you will have a wall of zebras! Enjoy The Finished Look I know I’ve said this before, but I love the finished look! I had all kinds of people thinking that I had decided to go with the wallpaper. And when I didn’t like the placement of some of the zebras, I was able to have a do-over. Just paint over the zebra with the silver paint, and make him again! Something you definitely can’t do with wallpaper. Hopefully, you now know exactly how to make your own much less expensive version of the Scalamandre zebra wallpaper…all you have to do is figure out where to put them 🙂 Have comments or questions on my DIY Zebra Wallpaper? Tell us in the section below. You Might Also Like
Let Your True Colors Shine Through Like a Rainbow wooden sign is a great art piece for a kids room, a craft room, a classroom, a birthday party, or any space that needs a little color or inspiration! Measures approximately 5 x 7 x 3/4 and is also available on a 6.5 x 9.5 plaque for $15. Select the size in the drop down menu. Please message me, if you are interested a size larger than those two options. MADE TO ORDER: —————————————————————- -Every sign is hand-painted, so each one will vary slightly from the last. -All signs will be sprayed with a sealer and have an unfinished back. -Each sign arrives ready to display with a saw-tooth hanger attached on the back. —————————————————————- Note: Items are made for indoor use only.
This easy DIY tutorial shows you how to make a radiator cover to cover those unsightly or unused radiators you might have in your home.
Farmhouse Lighting – Kitchen Chandelier – Whisk Chandelier – Industrial Light Fixture – Rustic Chandelier – Wood Lighting The wooden base shown in photos has a GREY finish . Let this unique light fixture bring a modern , industrial style to your home! It will look great in your kitchen , breakfast area, or even in your dining room. This handmade chandelier is made out of a five new unused wire whips attached to a wooden base. The electrical components are high quality UL Recognized Components. The pendant itself is not UL approved. This light is a perfect way to add that modern industrial look to any room. MEASUREMENTS : * wooden base 18 diameter * wire whip 7.5 tall * height 22 when measuring from the ceiling to the bottom of whisk Wire whips are attached to a grey finish wooden base with a grey twisted cloth covered light cord. The maximum bulb wattage is 60w for a regular chandelier bulb with a candelabra base. Any wattage can be used for LED or CFL chandelier bulb with a candelabra base. Bulbs are not included. CARE : Clean with a soft dusting cloth. Do not use any household cleaning products. https://www.etsy.com/shop/IWantThattt
https://m.facebook.com/IWantThattt Let this unique light fixture bring a modern , industrial style to your home! It will look great in your kitchen , breakfast area, or even in your dining room. This handmade chandelier is made out of a three new unused wire whips attached to a wooden base. The electrical components are high quality UL Recognized Components. The pendant itself is not UL approved. This light is a perfect way to add that modern industrial look to any room. MEASUREMENTS : * wooden base 12 diameter * wire whip 7.5 tall * height 22 when measuring from the ceiling to the bottom of whisk Wire whips are attached to a grey finish wooden base with a grey twisted cloth covered light cord. The maximum bulb wattage is 60w for a regular chandelier bulb with a candelabra base. Any wattage can be used for LED or CFL chandelier bulb with a candelabra base. Bulbs are not included. CARE : Clean with a soft dusting cloth. Do not use any household cleaning products. https://www.etsy.com/shop/IWantThattt
This adorable yet simple DIY Rustic Wooden Bunny is a perfect craft to bring a little Easter decor to your yard! Be sure to check out the easy-to-follow step-by-step tutorial provided!
Seriously the easiest and really clear explanation of how to sew a pillow cover with piping around the edges. Site also links to great places to buy fabric online.
Cool DIY Room Decor Ideas in Red – Creative Home Decor, Wall Art and Bedroom Crafts to Accent Your Red Room – Creative Craft Projects and Quick Arts and Crafts Ideas for Teens and Adults – Easy Ways To Decorate on A Budget http://diyprojectsforteens.com/diy-room-decor-red
This nature spectrum is perfect for tying together your interiors in a seasonal colour scheme
Do you know how to clean seashells the RIGHT way? Yes, there is a right way to clean seashells! This little trick is perfect for getting rid of the gunk and getting those seashells ready for crafting and displaying around the home! I just cant get enough